Results 1 to 10 of 17

Thread: Tailgate Fabrication

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2007
    Location
    China Lake Naval Base, SoCal
    Posts
    222

    Default Tailgate Fabrication

    I've been looking for a tailgate close by with no real luck. Because I can fabricate just about anything, I thought I could make one. I really want the Jeep logo on the back cause not to many people believe the large truck is a Jeep or even know about them. I've read where you can use a J truck's gate and patch it into one just to get the JEEP stamping.

    First thought was to cut the letters out of a thin sheet with a CNC plasma and weld them onto a plate. Then use a filler to get the round stamped look. Hours of sanding etc.

    Has anyone tried forming the stamping? I thought I might try a thin sheet with some letters cut from wood or a CNC plasma cut letter from metal. Then torch the thin sheet over the mold. I know it will potatoe chip or curl and warp, but I thought I might be able to flatten it and keep it that way with a backing plate and the tailgate frame. I'm not a blacksmith, so I have no real experience with heat forming except for our stock wheel flares, and bending tubing with sand and a torch.
    Go Ahead, Make my day

  2. #2

    Default

    If you go to the trouble to CNC plasma the letters. It would be just as easy to cut the parts from 1/4" and make die for each letter. The trouble would be setup in a press. You could get the money back in sales. Hint Hint

  3. #3
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,732

    Default

    That is a great idea. but, making the trademarked name for profit will bring a lawsuit your way. That is why the two new tailgate kits I am aware of don't say Jeep on them. Maybe with the new owners, somebody can get the license to stamp them again?
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  4. #4
    Join Date
    Dec 2006
    Location
    KINGSPORT, TN.
    Posts
    229

    Default

    there isnt enough $$$$$$$$ in the market place to warrent the expense of doing it or i would have done it in my repro gates. just use stick - on letters from a sign shop. knowbody but a m715 nut will know the difference or just buy a good t-gate....
    bob

  5. #5
    Join Date
    Dec 2006
    Location
    St. Louis, Mo.
    Posts
    338

    Default

    I had the resources to have the stamp done, forget the lawsuit mumbo jumbo. The set up cost, buddy plan was lets say I could but 10 good tailgates! Unless there rusted out in the jeep area there simple to fix.

  6. #6
    Join Date
    Jan 2007
    Location
    China Lake Naval Base, SoCal
    Posts
    222

    Default

    Quote Originally Posted by vrod02 View Post
    I had the resources to have the stamp done, forget the lawsuit mumbo jumbo. The set up cost, buddy plan was lets say I could but 10 good tailgates! Unless there rusted out in the jeep area there simple to fix.
    ? I don't understand the statement "of but 10 good tailgates!"

    I think Tim had a good point, but I didn't look to make a profit, just a good replica. I don't think my non jeep friends would be convinced with the vinyl stick on's, however, I have a great friend that could do that.

    My question was one of heating the sheet metal to form it. Anyone ever try it and have decent results? Or is it an impossibility?
    Go Ahead, Make my day

  7. #7
    Join Date
    Oct 2006
    Location
    Atlanta, Ga.
    Posts
    369

    Default

    Quote Originally Posted by vrod02 View Post
    I had the resources to have the stamp done, forget the lawsuit mumbo jumbo. The set up cost, buddy plan was lets say I could but 10 good tailgates! Unless there rusted out in the jeep area there simple to fix.
    Is this production run going in before or after the repro cab corner gaskets?

  8. #8
    Join Date
    Jan 2004
    Location
    Geneva, FL
    Posts
    731
    Blog Entries
    1

    Default

    Holey resurrection batman!!! A thread from the dark ages!!

    Sent from my SM-G781V using Tapatalk

  9. #9

    Default

    At this point now a days you could probably 3d print the letters and bolt them on

Similar Threads

  1. Tailgate
    By cliff1977 in forum Open Discussion
    Replies: 2
    Last Post: February 24th, 2010, 07:45 AM
  2. Tailgate
    By Slug in forum Stock Tech
    Replies: 4
    Last Post: September 23rd, 2009, 11:14 AM
  3. Tailgate 101
    By vrod02 in forum Open Discussion
    Replies: 13
    Last Post: April 25th, 2007, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024