some pictures of some works from the last months:
all is selve made/cad drawed cnc laser made a lokal company in südtirol
bearing retainer and released bearing is custom made to work with chrysler fork and bellhousing. al this swapü works because the chrysler bellhousing is about 40 mm shorter than the original so the inputshaft is long enough to take the 40 mm thick adaper plate. the mechanism to activate the clutch is also selfmade will sent picktures if interested. i would recommend to cut the fire wall when you se the first cracks otherwise you need to weld and grind to that the shape gets clean and nice i welded big areas one uis pictured so that i could grind it so that there are no bumps. the adapterplate is centered by the screws and the mid circle now i only would center it will the mid circle of the bearing retainer.