I start the A again, it didn't have the right space.
The diagram of my installation, circuit breaker and slave receptacle.
https://i.imgur.com/hRTiVjx.jpg
https://i.imgur.com/O61Tjhu.jpg
https://i.imgur.com/iYkgAMt.jpg
Printable View
I start the A again, it didn't have the right space.
The diagram of my installation, circuit breaker and slave receptacle.
https://i.imgur.com/hRTiVjx.jpg
https://i.imgur.com/O61Tjhu.jpg
https://i.imgur.com/iYkgAMt.jpg
The glass is cracked in the middle, it took me a while to realize.
I will have to start over.
https://i.imgur.com/SqF2LrS.jpg
https://i.imgur.com/HhUZ8vI.jpg
https://i.imgur.com/v7EqqFv.jpg
Really nice, thanks for the pictures.
The truck is looking great! I love the different 4-color camo paint you went with instead of the usual Woodland winter patern.
You said "I drove it today, the brake system is not leaking but it is not still braking." Either the brakes are not adjusted correctly or you still have air in the system and need to bleed them some more. Or a combination of both. You may have to go through the system to make sure everything is working properly.
Nothing of the kind.
I am waiting for new brake shoes, the existing ones are worn to the iron.
I will also install a new NOS master cylinder, I like the original stock.
From scratch, the brake system is a long rebuild.
The photo below shows the correct fit and the wear in question.
https://i.imgur.com/BkB5iDy.jpg
One word, "Nice".
Out of four original shocks, two were still in very good condition, one front and one rear.
After renovation and transformation they will be equal to be installed at the back.
https://i.imgur.com/Wp6U2Sz.jpg
https://i.imgur.com/wm5LNyh.jpg
https://i.imgur.com/K469qn7.jpg
https://i.imgur.com/OBa6jwK.jpg