Anybody got the Napa #'s handy? Any tricks? The lucas oil is coming out so there toast.
Printable View
Anybody got the Napa #'s handy? Any tricks? The lucas oil is coming out so there toast.
I tried Lucas in 96...it boils heavy in mine...smells nasty coming out the vents.
The 205 seals fit the 200...and are rated at a higher temp too...a good idea...
This is in the parts file:
Quote:
Transfer Case Front Output Seal
National # 450308, but I'd strongly suggest using the superior ones from ABLinn
from bump_r
Is that number for all the driveline seals in the 200/205?
Sorry...that is confusing...
That part number is for the NP200 seal available from AB Linn. It is a heavy duty seal in that it has extra meta to retain its shape.
The NP205 ones, you can go to an auto parts and state that you have an NP205 in any vehicle that came with them stock...like a 74 Dodge W200 with a 360 V8...thats a 3/4 ton with 4wd...
I checked Napa, they list:
Transfer Case Input Shaft Seal: NOS 21213
Transfer Case Rear Output Shaft Seal: NOS 21213
(Note, same part number for both ends of the tcase.)
If you go to their site:
www.napaonline.com
And enter that part number in the Napa part number box, the page will come up...heres some specs they list:
Attributes:
Features & Benefits:Spring Loaded W/Auxiliary Dirt lip
Inner Case
SKF Patented Bi-Directional Wave Seal
Positive Fluid Control
High Quality General Purpose Rubber
Temps from -40 to 250
I.D.:2.1250"
O.D.:3.0660"
Width:0.5000"
Price is $10.69 on their website.
i,ve gott some triple lip seals for the np200 t-case made by timken.
bob
Thank you Grand poppa. Made my life a little easier.:lol: I hate going to the parts store and telling them I have a 7.:mad: I like the link as well.:idea:
No sweat...glad it helps!